How To Install Hl 2270dw Wireless

Configure the Blood brother machine for a wireless network using automated wireless style (Wi-Fi Protected Setup or AOSS™)

If you have a WLAN access point/router supporting WPS (Wi-Fi Protected Setup) or AOSS™ (AirStation One-Bear on Secure Organisation), you can easily connect your Blood brother machine to your wireless network every bit beneath.

To apply WPS or AOSS™, your WLAN admission indicate/router must support WPS or AOSS™. Confirm your WLAN access bespeak/router has the WPS or AOSS™ symbol as shown beneath. For more details, refer to the instructions provided with your access betoken/router.

Configure the wireless settings:

1. Identify the Brother machine inside range of your WPS or AOSS™ access point/router.

   The range may differ depending on your environment. Refer to the instructions provided with your access point/router.

2. Make certain that the power cord is plugged in.
3. Turn on the machine and wait until the auto is in the Ready state.
4. Hold downward the WPS or AOSS™ button on your WLAN access indicate/router for a few seconds.

   

   The length holding down the button may differ depending on the WLAN access point/router. For the information on how to ostend if the WLAN admission point/router is fix for apply, refer to the instructions provided with your admission betoken/router.

5. Press the wireless setup push located at the back of the machine for less than 2 seconds as shown in the illustration below.

   

   • Use a pointy object such as a ballpoint pen to press the button.
   • DO Not press the button for 3 seconds or more, since the car volition change to the Pivot Method of the Wi-Fi Protected Setup way. To clear this mode, wait for 5 minutes or turn the printer ability switch off and and then turn information technology on over again. Later immigration this way, printing the wireless setup button and endeavor from the step i again.
6. The motorcar will search for an WLAN access point/router that supports Wi-Fi Protected Setup or AOSS™ for two minutes. During that time, the Toner LED will blink (plough on for 0.2 seconds and off for 0.1 2nd).

   

   The printer is connecting an WLAN access point/router. During that time, the Toner and Drum LEDs will blink (turn on for 0.2 seconds and off for 0.1 second).

   

7. Wait until the Ready LED of your machine indicates Connected. The Ready LED will turn on for 5 minutes. This indication means the machine has successfully connected to your WLAN admission bespeak/router.

   

   If the Ready LED isn't flashing, the printer fails to connect to your WLAN access point/router.

   If the connection failed, cheque the error lawmaking on the printed WLAN report, and click here for more than details on the error code.

Wireless setup is now consummate.

Delight continue to the following steps to install the printer driver for network connection. Even if you have printed with USB connection, you lot need to install the printer driver for network connection.

Installing the commuter for network:

NOTE: The screens may differ depending on operating system being used and your Blood brother automobile.

1. Make certain that your computer is ON and you are logged on with Administrator rights.

   If in that location are any programs running, shut them.

2. Put the installation CD-ROM into your CD-ROM drive.
   

   For Windows users:

   If yous do not have the CD-ROM, delight go to Downloads section of this website and download Total Driver & Software Package. The installation instructions are available on the download page.

   For Macintosh users:
   If you do not have the CD-ROM, delight go to Downloads department of this website and download the printer driver. The installation instructions are available on the download page.

   • For Windows users
   • For Macintosh users

   For Windows users:

   1. The installation screen will appear automatically. If prompted, select your model and linguistic communication.

      NOTE: If the installation screen does non appear automatically, click here to see how to open the installation screen.

   2. The CD-ROM principal card will appear. Click Install Printer Commuter, and click Yes if y'all accept the license agreement.

   When the User Account Control screen appears, click Allow or Yeah.

   

   3. Follow the on-screen instructions to complete setup.

   For Macintosh users:

   1. Double-click Kickoff Here OSX icon to install.

      

   2. Follow the on-screen instructions to complete setup.

Content Feedback

To help us improve our back up, please provide your feedback below.

Source: https://support.brother.com/g/b/faqend.aspx?c=id&lang=en&prod=hl2270dw_all&faqid=faq00002037_011

Posted by: powelllize1960.blogspot.com

Share this post